| English   Contact Us  Add to Favorites 4006 833 802
Sourcing Center
 
4006 833 802
Sourcing Center Your location > Home > Sourcing Center
120 g of yellow Laminating Paper
Release Time2014/9/3 13:57:17     Reading9510 times
Name Unit Standard Test method
Thickness um 1403 GB/T451.3
Basis weight g/O 1202 GB/T451.2
Width mm Ordered width + 2 By dividing a direct measurement of the tape measure value of 1 mm
Length m
Tensile strength Transverse N/2.5cm 100 GB/T453
Longitudinal N/2.5cm 150
Elongation at break Transverse % 6 GB/T453
Longitudinal % 5
Tear Transverse MN 3500 GB/T455-2002
Longitudinal MN 4000
Heat shrinkage rate Transverse % 1 120 5min
Longitudinal % 0.5
Moisture % 51
Bursting strength Kpa 300 GB/T454
Paper core mm 762
 

Appearance:
1, drum face should level off, clean, can not have split;
2, paper should level off, there can be no wrinkles, folds, deformity, hole, various spots, sand, hard block and other effects using paper disease;
3, the colour and lustre of paper should be consistent;
4, Each volume joints shall not be more than one, and have joint volume is not greater than the whole order volume by 20%, joint marking should be colored paper.
Environmental requirements, in line with the ROHS directive, phthalates, EN71-3 standard.
Packing: inside to use thin film bag packing, paper packaging, moisture-proof, waterproof.
Other indicators according to gb/line mark, or the enterprise standard approved by the company. Base paper appearance, colour and lustre according to provide the pattern on both sides shall prevail.

 ContactsPurchase department Mobile telephone
 Tel0760-23372273 E_mail
Prev80 g coated paper Next75 g of yellow Laminating Paper
Copyright © 2003-2014 Lecco (Zhongshan) Adhesive Products Co., Ltd. All Rights Reserved.
ICP09019312
AddressNo.68 Guangfu Avenue, Dongsheng Town, Zhongshan City, Guangdong Province, China.